bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Winnebago Tour Motorhome


  • Recommended Replacement For An Atwood GCH10A-4E In A 2006 Winnebago Tour Motorhome
  • Motorhome manufacturers have definitely limited what you can use with their door designs. All of the standard sized units we currently offer have the exhaust located towards the top in the middle so they wouldn't work well with your motorhome's door. The only other option that would work besides cutting out a new exhaust hole in the door would be to swap to a unit like the Excel RV Tankless Water Heater # EX93FR, which doesn't require a vent to the outside. This unit can just requires...
    view full answer...

  • Availability Of Trailer Hitch Receiver For 2010 Winnebago Tour Class A Motorhome
  • I may have a universal hitch option, but at this time there are no custom fit trailer hitch receivers confirmed to fit your 2010 Winnebago Tour Class A Motorhome. The # 41947 you were looking at is only confirmed to fit select Dodge, Chevrolet, and Ford Trucks. It may be possible to have a local fabricator add the # 41990-16 which fits frames up to 44" wide and has a 1600lb tongue weight rating and 16000lb trailer weight rating with a 2" receiver. This hitch will need to be welded to the...
    view full answer...

  • Is The Furrion Chill Replacement RV Air Conditioner A Replacement For A Coleman Mach 8
  • Yes the Furrion Chill Replacement RV Air Conditioner for Coleman Setup # FR42PV is a direct replacement for your existing Coleman Mach 8 as these units are designed to be a replacement for any Coleman Mach Air units, which your Coleman Mach 8 is retroactively compatible with. There is also an adapter wring kit included to work with your existing Coleman setup.
    view full answer...

  • Will the etrailer eDream Supreme RV Mattress Bend when the Slide is Retracted
  • The etrailer eDream Supreme RV Mattress part # e77FR is a nice and flexible mattress. It will bend to work with your slide in but of course it will want to return to its previous flat position and there will be pressure trying to get it back to that position. It is very similar to a standard mattress. It is flexible but not something you can fold several times.
    view full answer...

  • Fan-Tastic Vent Fan FV803350 Compatibility with Existing RV Wall Switch
  • You should be just fine replacing your two roof vents with the Fan-Tastic Vent Roof Vent # FV803350 since these fit the standard 14-1/4 x 14-1/4-inch RV roof opening size. Since you are replacing two 12V powered vents with two similar units your existing switch should work but the air direction and thermostat functions will be operable on the new fan units themselves. If you want to check it for an amperage rating that's not a bad idea. Each of the Fan-Tastic Vent Roof Vents # FV803350...
    view full answer...